LISTING OF PLAN APPLICATIONS REGISTERED (FOR ADVERTISEMENT)
Applications Advertised on November 17, 2021. This list was printed on November 17, 2021
Objections to applications must be received within 14 days of the date advertised (December 01, 2021)
Summary of Application Details
The applications shown below are available for review on the EnerGov Customer Self Service Portal
(https://planningenergov.gov.bm/EnerGov_Prod/SelfService#/home), or during normal working hours at the
Department of Planning, 5th Floor, Dame Lois Browne Evans Building, 58 Court Street, Hamilton HM 12.
Letters of objection should state any interest which the objector(s) may have in property nearby, supply an address
at which notice may be served on the objector(s), and provide a concise statement of the grounds of the objection.
For further information on the objection procedure see the Development and Planning (Applications Procedure) Rules
1997.
Application
Southampton
P0449‑21
Alexander Hamilton
117 Middle Road
Southampton SN01
Application for Assessment Number of Existing One Bedroom Unit (Attached) (3 Units Total)
(Final Approval)
Paget
P0405‑21
Paula Lewin
3 Seabright Avenue
Paget DV04
Convert Basement to 2nd Dwelling‑Cycle Only with Cycle Parking Bay, Stair and Replace Retaining
Wall Adjacent to Hungry Bay Lane.
(Final Approval)
P0475‑21
Michelle Hayes
185 South Road
Paget DV04
Proposed Alterations and Additions to Include Two (2) One (1) Bedroom Units and Studio by Internal
Conversion (4 Units Total), Pool and Pool Enclosure, Concrete Pavers, 7ft High Concrete Pillars
and Gate at Driveway, Fire Pit, Fountain, 4ft Boundary Wall with PVC Railing, Pump Room, and
Parking Area
(Final Approval)
P0463‑21
Lisa Lee Dickinson
13 Tanglewood Road
Paget PG03
Proposed Addition of Master Bedroom, Bathroom, Garage and Roof Mounted Solar PV System
24 x 315 Watt Panels 15 Sq. ft. Per Panel ‑ Total Capacity 7.56kwh
(Final Approval)
Pembroke
S0028‑21
Kathleen Moniz
15 Ridgeway Road
Pembroke HM09
Proposed Boundary Adjustment Between 15 & 17 Ridgeway Road to Allow Features to be Solely on One Property.
(Final Approval)